ENGINEERED RESIDENTIAL
 

Product Images

Model SHEF42 Series

4/10 HP Cast Iron Submersible Effluent Pump

The SHEF42 Series Pump is a rugged, submersible cast iron pump with a clog resistant, semi-open impeller and solids handling capability to 3⁄4”. Unit has a 4⁄10 HP single phase motor complete with power cord.  2” NPT vertical discharge is standard.

A full selection of accessories for automatic operation is available, and includes float switches, duplex controllers, simplex controllers, alarms, basins and check valves.

Key Features
  • Bearings & Mechanical Seal -- Permanently Lubricated for Long Life
  • Impeller -- Semi-Open Style, Pump-Out Vanes for Seal Protection
  • Overload Protection -- Built-In Thermal Overload with Automatic Reset
  • Cord Design -- Prevents Oil Loss From, and Moisture Entry Into, the Motor
  • Serviceability -- Heavy Duty Lift-Out Ring. Field Serviceable
  • Solids Handling -- 3/4" Spherical Capability
  • Stainless Steel Hardware -- Allows Easy Disassembly After Extended Service
  • Controls -- Standard Controls Available for Automatic Operation
Warranty

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Specifications    
Resources    

 

BODY CONSTRUCTION:  Cast Iron

HORSEPOWER:  4/10 HP

MAXIMUM HEAD:  40'

MAXIMUM CAPACITY:  64 GPM

FLOW at 10' LIFT:  53 GPM

SWITCH TYPE:  Available -- see your dealer

DISCHARGE PIPE SIZE:  2” NPT

MAXIMUM SOLIDS HANDLING SIZE:  3⁄4”

AMP DRAW (full load):  9.7 Amps

CORD LENGTH:  20’ oil and water resistant 18-3 SJTW-A/SJTW

VOLTAGE:  115 Volts single phase, 60 Hz.

MAXIMUM LIQUID TEMPERATURE:  130°F (55°C)

IMPELLER:  Fiberglass reinforced Noryl® with threaded insert

:  

:  Noryl® is a registered trademark of SABIC Innovative Plastics IP BV

Owner's Manual: SHEF42 Series
DOWNLOAD MANUAL
Sell Sheet: SHEF42 Series
DOWNLOAD SHEET
Brochure: SHEF30/40/42/45 and HP33M/50M
DOWNLOAD BROCHURE